Changing Buckle Position - Safety 1st Grow and Go ARB Manual

Changing Buckle Position

13
1
Buckle
Tongue
2
3
4
Unbuckle Harness
Press in towards the top of
the red button to release the
buckle tongues.
Fully Recline the Car
Seat
Pull out on recline handle and
push top of child restraint back.
Locate the Buckle's
Metal Retainer
1
Reach under the seat between
2
the base and shell and through
3
the recline handle.
Rotate Metal Retainer
1
and Push It Up Through
2
Buckle Slot in Shell
3
5
6
1
2
3
7
8
If you cannot achieve a snug harness fit for your child, see pages
15-18.
To learn how to check harness tightness, see pages 52-54.
Failure to place buckle's metal retainer completely through
pad and shell can result in serious injury or death.
14
From Top of Seat,
Pull Buckle Out of
Shell and Pad
1
2
3
Insert Buckle's Metal
Retainer into Slot
Closest to Child
Buckle must face out.
Rear-Facing Mode: You must
use the 1st or 2nd buckle
slots. Forward-Facing Mode:
Any slot can be used.
Reach Under the Seat
Between Base and Shell
and Through Recline
1
Handle
2
Pull buckle's metal retainer
3
completely through pad and
shell.
Check Buckle
1
Pull up on buckle to make sure
2
it is secured.
3
The buckle must not pull out.
1
2
3