Changing Headrest/Harness Height; Changing Buckle Position - Safety 1st Grow and Go Extend N Ride Manual

41

Changing Headrest/Harness Height

1
Fully Loosen Adjust Headrest/Harness Height
Harness Straps
1. Squeeze the adjustment
Push down on the harness
handle lever up.
release lever (through the
2. Move the headrest up or
opening in the pad) while
down to the proper height
pulling out on the harness
for your child.
straps as shown.
2
For Rear-Facing Child
Fit, see page 9.
For Forward-Facing
Child Fit, see page 20.
To learn how to check
harness tightness, see
pages 29-30.
If you cannot achieve
a snug harness fit for
your child, see pages
3. Release the handle to
44-47.
lock in place.
4. Make sure it is locked
Check the harness
securely.
straps often for any
wear or damage.

Changing Buckle Position

1
WARNING:
Failure to place
buckle's metal retainer
completely through pad
and child restraint can
result in serious injury
Unbuckle Harness
or death.
Press in towards the top of
the red button.
2 3
Recline Car Seat From Top of Car Seat,
Pull Buckle and
Reach under the car seat.
Rotate the buckle's metal Buckle Cover Out of
retainer and push it up
Car Seat and Pad
through the car seat.
continued on next page
42