Changing Headrest/Harness Height; Changing Buckle Position - Safety 1st Grow and Go Instructions Manual

Changing Headrest/
XX
11
Harness Height
1
Fully Loosen Harness Straps
Push down on the harness release
lever (through the opening in the
pad) while pulling out on the harness
straps as shown.
2
Changing Headrest/
Harness Height
Rotate the headrest/harness
adjustment levers inward.
Move the headrest up or down to
the proper height for your child.
Make sure it locks securely.
For Rear-Facing Child Fit, see page 9.
For Forward-Facing Child Fit, see page 10.
Check your child's fit often.
If you cannot achieve a snug harness fit for your child,
see pages 15-18.
To learn how to check harness tightness, see pages 49-51.
Check the harness straps often for any wear or damage.

Changing Buckle Position

1
Unbuckle Harness
Press in towards the top of the red
Buckle
button to release the buckle tongues.
Tongue
2
Fully Recline Car Seat
Pull out on the recline handle and
push the top of the car seat back.
The recline handle is at the front of
the car seat.
3
Locate Buckle's Metal Retainer
Reach under the car seat between
the base and shell to reach the
buckle's metal retainer.
12
continued on next page