Advertisement
FLORAL MOTIF 3 - TIER CERAMIC OUTDOOR
WATER FOUNTAIN WITH LED LIGHT RINGS
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.
Parts
Ball Topper
Small Tier with LED Light Ring
Medium Tier with LED Light Ring
Large Column
Large Tier with
Electric Submersible Pump
AC Adapter
Pedestal
Water Tube
Rubber Washer
ASSEMBLY
1. Place the large tier with the built-in electric submersible pump on the pedestal and twist to lock in place.
2. Run the long pump power cord through the tube in the large tier. Pull the cord out the bottom of the pedestal
and place it beneath the groove in the back-side of the pedestal.
3. Assemble the water tube and attach it onto the pump making sure the end with the rubber washer is on top.
Remove the rubber washer and save it for use during Step 7.
4. Slide the large column over the water tube and gently place the large column onto the large tier. Run the
light splitter cable (attached to the pump) up through the large column.
MZ14871BB
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
Assemble components on a soft, clean surface to avoid damaging the finish.
Select a smooth, level surface to place the fountain.
Qty.
Ensure all parts are
accounted for before
1
disposing of packaging.
1
1
1
1
Over time, the finish may gradually mellow in color; this is part of the natural aging
1
process and is not cause for return.
1
1
1
/
/
Order/Customer Reference Number:
SSS-399
NOTES: There is a polyurethane foam filter/splash guard inside the
topper, do not remove the filter/splash guard. The filter helps control water
flow to prevent splashing.
04/2022
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
2-PERSON
ASSEMBLY
RECOMMENDED
Cascading
water sounds
Page 1 / 3
Advertisement
Table of Contents
Related Manuals for Sunnydaze Decor SSS-399
Summary of Contents for Sunnydaze Decor SSS-399
- Page 1 Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
- Page 2 5. With assistance, run the light cable from the small tier down through the medium tier. Slide the tiers over the water tube and firmly connect the lights from both tiers to the splitter cables. 6. Gently place the tiers onto the large column, ensuring all cables are inside the fountain. IMPORTANT: Do not allow the cables to get caught/pinched between the tiers as this can damage the wires.
- Page 3 Troubleshooting • If water is not flowing within several moments of the fountain being plugged in, the pump may have air bubbles in the filter, which can prevent water from circulating properly and can also cause excess pump noise. • Ensure that the pump is fully submerged underwater; add water to the reservoir as necessary. •...
Need help?
Do you have a question about the SSS-399 and is the answer not in the manual?
Questions and answers