Advertisement
Table of Contents
FLORAL MOTIF CERAMIC 3 - TIER OUTDOOR WATER FOUNTAIN
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.
Assemble components of this fountain on a soft, clean surface to avoid scratching or damaging the finish.
Parts
Ball Topper
Small Tier with LED Light Ring
Medium Tier with LED Light Ring
Large Column
Large Tier with
Electric Submersible Pump
AC Adapter
Pedestal
Water Tube
Rubber Washer
ASSEMBLY
1. Place the large tier with the built-in electric submersible pump onto the pedestal and twist the tier clockwise
to lock into place.
2. Run the long pump power cable through the tube in the large tier and through the pedestal. Pull the cord out
through the groove in the back-side of the pedestal.
3. Assemble the water tube and attach it onto the pump making sure the end with the rubber washer is on top.
Remove the rubber washer and save it for use during Step 7.
4. Slide the large column over the water tube and gently place the large column onto the large tier. Run the
light splitter cable (attached to the pump) up through the large column.
MZ14871BB
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerservice@serenityhealth.com, or via our contact us page at
WITH LED LIGHTS
SSS-399
Select a smooth, level surface to place the fountain.
Qty.
1
Inspect packaging to ensure all parts are accounted for
1
1
*
1
2 people are recommended to safely assemble this product.
1
NOTE:
There is a polyurethane foam filter/splash guard inside the ball topper;
this filter helps control water flow to prevent splashing. Do not remove or discard
1
this filter/splash guard.
1
1
1
/
/
Order/Customer Reference Number:
before disposing of packaging.
09/2019
www.SerenityHealth.com/contact-us/
Page 1 / 2
Advertisement
Table of Contents
Related Manuals for Sunnydaze Decor SSS-399
Summary of Contents for Sunnydaze Decor SSS-399
- Page 1 Purchase Date: Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
- Page 2 5. *Run the light cable from the small tier down through the medium tier. Slide the tiers over the water tube and firmly connect the light cables from both tiers to the light splitter cable (attached to the pump). 6. Gently place the tiers onto the large column, ensuring all cables are inside the fountain. Do not allow the cables to get caught/pinched between the tiers as this can damage the wires.
Need help?
Do you have a question about the SSS-399 and is the answer not in the manual?
Questions and answers