Advertisement
STEP 7: INSTALL ON VEHICLE
Read the Quick Installation Guide, including the Safety Warnings
that are located in the Iridium Edge shipping box.
Before removing the red cover from the double sided tape on the
Iridium Edge and affixing the device to your vehicle, be aware that
tape mounting is intended to be permanent and later removal will
damage a vehicle's finish.
Park the vehicle in an open area with 360 degrees visibility of the
sky without any obstruction from objects such as buildings, trees
or large vehicles.
The Iridium Edge should be mounted flat on a vehicle, facing
upwards. Secure the breakout cable inside the vehicle, taking
care to keep a minimum length of <10cm (`4 in) of cable outside.
Be sure to secure Iridium Edge so as to not cause damage
to persons or property. If you have any concerns about the
adequacy of the mounting for the Iridium Edge, seek advice
from an installation technician or other qualified individual.
After ensuring power is available inside
the vehicle, connect the "Automotive
Power Adapter" to the breakout cable
and insert into car power port or cigarette
lighter socket.
8
Advertisement
