Advertisement
STEP 5: VERIFY PROVISIONING
With the Iridium Edge device connected
to the Iridium Edge Demo App, select
the "Check Provisioning" button on the
Device page to confirm provisioning.
(This step requires a data connection
and does not use the Iridium satellite.)
STEP 6:
CONFIGURE APP REPORTING
On the "Location" page, confirm
that your current position is displayed
with a blue dot.
Select a Report Pace of 2 minutes and
press the "Start" button to enable the
phone to send regular location-based
reports. If your position is not shown,
ensure Location Services in your
phone setting is enabled for the app.
The "Transmit Timer" counts down
to the next report transmission.
Using the app with GPS Reporting
enabled allows the Iridium Edge to
receive service requests from Iridium,
as well as transmit GPS reports. When
GPS Reporting is enabled, the Demo
App continues to run even when the iPhone is left idle or when
other Apps are selected; thus allowing it to service requests
from the Iridium network and transmit the GPS reports.
7
Advertisement
