Advertisement
TROUBLE SHOOTING - DEVICE NOT CONNECTED
PROBLEM: "Connected" is not displayed on the Device screen.
SOLUTION
Confirm cables are
connected properly
(Refer to Step 2.)
Confirm power is present
Confirm iOS recognizes
the serial cable.
When the Transceiver
Cable is inserted into the
iPhone, the Transceiver
Cable should appear in the
list under Settings/General/
About. After selecting the
Transceiver Cable, the
iPhone should display its
details as per the adjacent
figure. If the Transceiver
Cable does not appear,
reset the iPhone
and recheck.
EXPLANATION
Confirm the three connections
·
Iridium Edge to Breakout cable
·
Breakout cable to power supply
·
Transceiver cable to Breakout cable
Confirm that the AC outlet is functional.
Use the Automotive Power Adapter
as an alternative way to verify power
cables are working properly.
13
Advertisement
