en
| 12 | TPA 300 | TPMS service
TPMS service
The TPA 300 is used to
- read, program and copy TMPS sensors,
- relearn the TPMS,
- test the radio remote control (RKE),
- store and retrieve recorded orders.
The OBDII module and the cables (special accessories) are required to register the tire
pressure sensor IDs in the vehicle control unit. You can find further information about
OBDII relearning in section 3.2 OBDII relearning (page 20).
Select "Start TPMS Service"
1
Vehicle selection
1.1 Selecting the vehicle manufacturer
|
1 689 989 549_en
2022-09-01
IMPORTANT:
Continue
Continue
Previous
Robert Bosch GmbH