Troubleshooting; Technical Specifications - NETGEAR ProSafe GS105 Installation Manual
10/100/1000 mbps gigabit ethernet 5-port switch
Hide thumbs
Also See for ProSafe GS105:
- Specifications (2 pages) ,
- Specifications (2 pages) ,
- Start here (2 pages)
Table of Contents
Advertisement
Troubleshooting
The Power light is not lit
The switch has no power.
•
Make sure the power cord is properly connected to the switch.
•
Make sure the power adapter is properly connected to a functioning power outlet. If it's
in a power strip, make sure the power strip is turned on. If the socket is controlled by a
light switch, make sure the switch is in the on position.
•
Make sure you are using the NETGEAR power adapter supplied with your switch.
The Port number light is not lit for a connected device or
stays on continuously
There's a hardware connection problem.
•
Make sure the cable connectors are securely plugged in at the switch and the device.
•
Make sure the connected device is turned on.
•
If the Ethernet cable is connected to a NIC or other Ethernet adapter, make sure the card
or adapter is installed correctly and is working.
•
Make sure the cable is less than 328 feet (100 meters).
Technical Specifications
Standards Compatibility:
Network Interface:
Power:
Physical Dimensions:
Weight:
Operating Temperature:
Operating Humidity:
Electromagnetic Compliance:
Safety Agency Approvals for
the Power Adapter:
Performance Specifications
Frame Filter Rate:
Frame Forward Rate:
Network Latency:
(using 64-byte packets)
Address Database Size:
Addressing:
Queue Buffer:
ISO/IEC 802.3i (ANSI/IEEE 802.3i) 10BASE-T, IEEE 802.3i 10BASE-T,
IEEE 802.3u 100BASE-TX, IEEE 802.3z 1000BASE-T,
IEEE 802.3x Flow Control; compatible with Windows®, Mac® OS,
NetWare®, Linux®
RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T Ethernet interface
14.4 W max and 12V@1.2A DC input
W: 158 mm (6.22") D: 105 mm (4.13") H: 25mm (0.98")
0.49 kg (1.0829 lbs)
0 to 40° C (32 to 104° F)
10% t0 90% relative humidity, noncondensing
CE mark, Commercial; FCC Part 15, Class A; EN 55 022 (CISPR 22), C-Tick
CE mark, Commercial UL listed (UL 1950), TUV licensed (EN 60950), C-Tick
14,800 frames/sec max for 10M port / 148,800 frames/sec max for
100M port/1,488,000 frames/sec for 1000M port
14,800 frames/sec max for 10M port / 148,800 frames/sec max for
100M port / 1,488,000 frames/sec max for 1000M port
100 Mbps to 100 Mbps: 20 µs max
1000 Mbps to 1000 Mbps: 10 µs max
8000 MAC addresses
48-bit MAC address
12 kilobytes per port
Power
Hide quick links:
Advertisement
Table of Contents
