Features - NETGEAR ProSafe FSM7328S Operating Instructions Manual

Features

The following list identifies the key features of the NETGEAR Model FSM7328S Managed Stackable Layer
3 Fast Ethernet Switch.
•
Twenty-four 10/100Mbps and four 10/100/100 Mbps auto sensing Fast Ethernet TP ports
•
Four SFP modules combo (shared with TP) with GTP for a variety of fiber connections
•
The four gigabit ports can be configured with stacking function to allow up to 8 switches to form a
stack with single management IP address
•
Full compatibility with IEEE standards:
o IEEE 802.3i, (10BASE-T)
o IEEE 802.3u (100BASE-TX)
o IEEE 802.3ab (1000BASE-T)
o IEEE 802.3z (1000BASE-X)
o IEEE 802.3x (full-duplex flow control)
•
Full Layer 2 switch management including:
o SNMP v3
o RMON (groups 1,2,3 and 9)
o IEEE 802.1Q (up to 512 Static VLAN groups)
o IEEE 802.1D (Spanning Tree)
o IEEE 802.1w (rapid spanning tree)
o IEEE 802.1s (multiple spanning tree)
o IEEE802.3ad Link Aggregation (LACP)
o Port Mirroring
o DHCP/Bootp Client for automatic IP address set up
o Configuration file export/import
o TFTP firmware upgrade
•
Layer 3 switch management including:
o RIP I, II
o IP Routing
•
Security to better safeguard your network
o Password Access Control
o IP Access Control List
o RADIUS Client Support
o Port Access Control
o SNMPv3
o Secure Sockets Layer (SSLv3)
o Transport Layer Security (TLSv1)
o Secured Shell (SSHv1,v2)
•
Traffic management to better manage traffic flows through your switch
o IEEE 802.1p (Class of Service)
o DiffServ traffic prioritization
o Broadcast Storm Control
o IGMP snooping
o Half-duplex back-pressure control
Page 6 of 24