Sharp KI-N50TA Operation Manual page 56

Remote operation from a smart device
cannot be performed.
• Is the Wi-Fi Lamp of the air purifier on?
If the Wi-Fi Lamp is off, please perform "A1:
Wi-Fi adapter ON/OFF" to turn on the product
Wi-Fi. (Page 16)
• Have the connection between the air purifier and
your smart device been completed?
Set up the connection between the air purifier
and your smart device. (Page 11)
When changing the router
• It is necessary to reconnect the air purifier to the
router.
1. Hold down the "Wi-Fi" Button for 3 seconds to
stop the Wi-Fi function.
2. Perform "INITIAL SET UP: 2 Connection of
the air purifier and a router". (Page 10)
When changing the smart device
• Perform the following steps.
1. Delete the registration of the old smart device
from designated App.
2. Use the new smart device to perform "INITIAL
SET UP:
1 Download & Sign up, and
3 Connection between the air purifier and a
smart device". (Page 10, 11)
When going to dispose or hand over the
air purifier
• Perform the following steps, to prevent leak of
personal information.
1. Delete the registration of the air purifier from
designated App.
2. Perform "A4: Initialization of Wi-Fi function".
(Page 16)
In case of being handed over from a third
party
• To prevent unauthorized access from a third party,
perform "A4: Initialization of Wi-Fi function".
(Page 16)
Wi-Fi Lamp blinks slowly
• It is one of the following status.
A. The Wi-Fi connection of the air purifier and a
router is in setup.
B. The connection of the air purifier and a smart
device is in setup.
C. The software for the Wi-Fi function in the air
purifier is being updated.
Wi-Fi Lamp blinks fast
• Network error. Please confirm the Wi-Fi network
status from "A7: Display Wi-Fi network status".
(Page 17)
Wi-Fi Lamp goes off
• The air purifier cannot connect to the router.
Check the following.
A. Is the power plug correctly connected?
B. Has the Wi-Fi function been stopped? Confirm
the Wi-Fi network status from "A7: Display Wi-
Fi network status". (Page 17)
One of "
in the Wi-Fi setting mode.
(Page 16 - 17)
• If the Wi-Fi adapter is off, one of "A2" to "A6" may
not be selectable.
EN-26
" to " " cannot be selected