Appendix C: Technical Specifications - NETGEAR FS526T Installation Manual

APPENDIX C: TECHNICAL SPECIFICATIONS

This appendix provides technical specifications for the NETGEAR Model FS526T Smart Fast Ethernet Switch.
Network Protocol and Standards Compatibility
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3x flow control
Management
IEEE 802.1Q Static VLAN (Up to 64)
Port-based VLAN (Up to 26)
IEEE 802.1p Class of Service (CoS)
Port-based QoS (options High/Normal)
Port Trunking - Manual as per IEEE802.3ad Link Aggregation
Interface
26 RJ-45 connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T (Auto Uplink™ on all ports)
LEDs
Per port (10/100 and Gigabit): Link/ Activity, Speed
Per device: Power
Performance Specifications
Forwarding modes: Store-and-forward
Bandwidth: 8.8 Gbps
Network latency: Less than 20 microseconds for 64-byte frames in store-and-forward mode for100 Mbps to 100 Mbps transmission
Buffer memory: 784/512 KB embedded memory per unit
Address database size: 4,000 media access control (MAC) addresses per system
Addressing: 48-bit MAC address
Mean Time Between Failure (MTBF): 59,524 hours (~ 6.8 years)
Power Supply
Power Consumption: 25 W maximum
100-240VAC/50-60 Hz universal input
Physical Specifications
Dimensions (W x D x H): 330 x 207 x 43 mm (13 x 8.15 x 1.7 in)
Weight: 2.25 kg (4.95 lbs)
Environmental Specifications
Operating temperature: 0 to 40°C (32 to 104°F)
Storage temperature: -10 to 70°C (14 to 158°F)
Operating humidity: 90% maximum relative humidity, non-condensing
Storage humidity: 95% maximum relative humidity, non-condensing
Operating altitude: 10,000 ft (3,000 m) maximum
Storage altitude: 10,000 ft (3,000 m) maximum
Electromagnetic Emissions
CE mark, commercial
FCC Part 15 Class A
VCCI Class A
C-Tick
MIC
Electromagnetic Immunity
EN 50082-1
EN 55024
Safety
CE mark, commercial
TUV licensed (EN 60 950)
cUL IEC950/EN60950
Page 18 of 20