Advertisement
WARNING
The wall switch or wall
control wit
h light dimmer
function will damage the ballast
of the fluorescent bulb, it is
NOT ALLOWED to use this kind
of wall switch or wall control for
this fan.
4
3
2
1
Figure 20
NOTE: The light is NOT dimmable.
Here are some suggestions to help you maintain
your fan
1.Because of the fan's natural movement, some
connections may become loose. Check the support
connections, brackets, and blade attachments
twice a year. Make sure they are secure. ( It is not
necessary to remove fan from ceiling. )
2. Clean your fan periodically to help maintain its
new appearance over the years. Use only a soft
brush or lint-free cloth to avoid scratching the
finish. The plating is sealed with a lacquer to
minimize discoloration or tarnishing. Do not use
water when cleaning. This could damage the
motor, or the wood, or possibly cause an electrical
shock.
3. Use the enclosed Blade Balancing Kit if the
blade wobble is still noticeable.
4. If the blade wobble is still noticeable,
interchanging two adjacent (side by side) blades
can redistribute the weight and possibly result in
smoother operation.
3. You can apply a light coat of furniture polish to
the wood blades for additional protection and
enhanced beauty. Cover small scratches with a
light application of shoe polish.
4. There is no need to oil your fan.The motor has
permanently lubricated bearings.
MAKE SURE THE POWER IS OFF AT THE
ELECTRICAL PANEL BOX BEFORE YOU ATTEMPT
ANY REPAIRS. REFER TO THE SECTION "MAKING
Figure 21
Care of Your Fan 12.
IMPORTANT
ELECTRICAL CONNECTIONS"
Touching
ceiling
Advertisement
