Attack Checks - NETGEAR ProSafe FVS338 Reference Manual

FVS338 ProSafe VPN Firewall 50 Reference Manual
Figure 4-4

Attack Checks

This screen allows you to specify whether or not the router should be protected against common
attacks in the LAN and WAN networks. The various types of attack checks are listed on the
Attack Checks screen and defined below:
• WAN Security Checks
– Respond To Ping On Internet Ports. When enabled, the router will respond to a "Ping"
from the Internet. This can be used as a diagnostic tool and shouldn't be used unless you
have a specific diagnostic reason to do so.
– Enable Stealth Mode. If enabled, the router will not respond to port scans from the WAN,
thus making it less susceptible to discovery and attacks.
– Block TCP Flood. A SYN flood is a form of denial of service attack in which an attacker
sends a succession of SYN requests to a target system. When the system responds, the
attacker doesn't complete the connections, thus leaving the connection half-open and
flooding the server with SYN messages. No legitimate connections can then be made.
When enabled, the router will drop all invalid TCP packets and will be protected from a
SYN flood attack.
4-10 Firewall Protection and Content Filtering
v1.0, September 2006