Specifications - TZS First AUSTRIA FA-5663 Instruction Manual

PRODUCT DESCRIPTION:
1
1. heating plate
5. LED power light
3. power switch
4. 360°swivel power cord
PRODUCT FEATURES:
ON/OFF
push the power switch for approximately 1
second to switch the unit ON or OFF until the
power indication light starts or stops.
IONIC
This appliance is supplied with the device IONIC
Technology, which emits negative ions during the
drying. It can help to eliminate the electrostatic
loads from the hair to get soft style result. Once
appliance switched on, ionic will be produced to
maintain and care your hair
360° SWIVEL CORD
The swivel function prevents from twisted power
cable during use and gives you more comfort and
freedom during use.
RECOMMENDATIONS:
1. Your hair must be untangled, clean and dry (in
order not to damage your hair)
2. Put your appliance on a flat surface
3. Plug in the appliance and switch it ON. Wait for
some minutes until the appliance reaches the
required temperature. You will notice by the
indication light or display once the appliance
is ready.
4. The device must be used only for dry hair. Take
a strand of hair and pull it carefully downwards
until it is taut. The remaining hair should be
put up or fixed in place. Before the halves
are pressed together for approx. 5 seconds,
we recommend that you ensure that the hair
is positioned correctly. Always begin at the
base of the hair and move the device in the
direction of the hair tip. In order to produce a
uniform appearance it is important that the
next strands fall in one line. To ensure that the
waves are retained for a prolonged period we
recommend that you use only a coarse comb
or your fingers. Allow your hair to cool down.
4
3
2
Do not comb or brush it before it has cooled
down, as this would ruin the hairstyle you
have just created.
5. Turn OFF the appliance and pull out the plug
from socket after use. Leave it cool for a few
minutes before putting it away.
CLEANING AND CARE
Always ensure that the appliance is disconnected
from the mains supply before cleaning. Use a
damp cloth for cleaning and wipe dry. This will
help preserve the original finish of your hair dryer.
Abrasive cleaners should not be used.
STORAGE
When not in use "unplug it. " Allow the appliance
to cool and store it in a dry location. This
appliance features a loop allowing it to be
conveniently hung on a hook for easy access.
Never wrap the cord around the appliance since
this will cause the cord to wear prematurely and
break.
Repairs and other work undertaken on the unit
must only be done by authorised specialist
personnel!

SPECIFICATIONS:

100-240 V • 50-60 Hz • 35-37 W
Environment friendly disposal
You can help protect the environment!
Please remember to respect the local
regulations: hand in the non-working electrical
equipments to an appropriate waste disposal
center.
3