Download Print this page

Sony SS-NA8ES Service Manual page 8

Hide thumbs Also See for SS-NA8ES:

Advertisement

SS-NA8ES
2-6.
LOUDSPEAKER (13 cm) (WOOFER: LEFT SIDE) (SP1)
Note 1: When exchanging the loudspeaker (13 cm) (woofer: left side) (SP1),
refer to "NOTE THE SPEAKER UNITS REPLACING" on page 2.
3 terminal (green/black)
4 packing (13 cm)
Note 5: When installing the packing (13 cm), a glossy
surface is made into the speaker cabinet side,
and a rough side is made into the loudspeaker
side, and align the position of the tapped hole
of packing (13 cm) and speaker cabinet.
2 Pull out the loudspeaker (13 cm) (woofer: left side) (SP1).
Note 7: When installing the loudspeaker (13 cm) (woofer: left side)
(SP1), install to a speaker cabinet after checking that a
loudspeaker terminal is on the diagonal left.
loudspeaker terminal
position
8
Note 3: Check that the caulking portion of a terminal is outside suitable.
Note 6: When installing the loudspeaker (13 cm: left side) (woofer)
3 terminal (green)
tweeter part
5 loudspeaker (13 cm) (woofer: left side) (SP1)
Note 8:
Note 9:
Note 10: Check that the connection mistake or insertion of a wire are
Note 11: Insert the terminal straightly.
Note 12: After terminal insertion, should check acting as lock of the
Note 13: Be careful not to attach a crack to the edge of a speaker cabinet.
Note 14: Check packing (13 cm) not being twisted or not having fallen
loudspeaker (13 cm) (woofer: left side)
(SP1) "+" terminal
WO board
"W1+" wire (green)
caulking portion
WO board
"W1–" wire (green/black)
loudspeaker (13 cm) (woofer: left side)
(SP1) "–" terminal
(SP1), after each screw holes of the loudspeaker (13 cm)
(woofer: left side) (SP1) and packing (13 cm) are aligned,
attach it to the speaker cabinet.
Note 2: Do not touch the central part of the
loudspeaker (13 cm) (woofer: left side) (SP1).
Note 4: When installing screws (4 × 25),
follow the installing procedure in
the numerical order given.
tightening torque :
1.
1
1 four screws
(4
25)
4
Be careful not to attach a crack to a speaker cabinet using
the terminal of a wire.
Be careful not to put a wire.
not imperfect.
terminal completely.
into a speaker cabinet.
.1
m
3
2

Advertisement

loading