Acpi Power Management Modes (Windows 2000 And Windows98 Se Only) - HP Vectra VL400 Technical Reference Manual

ACPI Power Management Modes (Windows 2000 and Windows98 SE only)

• Standby
In Windows 2000 for example, you can enter this low power state by
clicking
Start
this mode, the LED on the PC's font panel blinks green.
There are two forms of Standby: normal (s1) and Suspend to RAM (s3),
which is a lower power consumption state than normal Standby. You can
use Suspend to RAM by enabling this feature in the PC's
To do this, press
F2
menu to
enabled
used.
• Hibernate (s4)
This is available in Windows 200 only and is lower power state than
Standby. In Windows 2000, you can enter this low power state by clicking
Start Shut Down
mode, the LED on the PC's font panel is off.
, then selecting
Shut Down
during startup, then set
. If this feature is disabled, the normal (s1) Standby is
, then selecting
Hibernate
4 BIOS Overview
Power Saving and Ergonometry
and clicking
Stand by
Program.
in the
Suspend to RAM
and clicking
OK
. In
OK
Power
. In this
45