Accessory Boards - HP Vectra VL400 Technical Reference Manual

Small Form Factor PCs
PCI Slot Numbers

Accessory Boards

The VL400 has four accessory board slots: three PCI slots and one AGP slot
(refer to the system board diagram on page 18 for their location). In the
minitower and desktop, you can also install the HP Two ISA Slot Extension Kit
(available as an accessory) for two ISA slots.
Some models have a high-end graphics card installed in the AGP slot.
In the VL400 SF, the PCI slots on the system board are not used for accessory
boards. Instead, there is a riser card installed in the special PCI-riser slot. The
standard riser card provides 3 PCI slots. An alternative riser card is also
available that provides one PCI slot and one combo PSI-ISA slot.
Your PC uses logical slot numbers in the BIOS
know these logical slot numbers if you want to change the PCI slot
configuration in the
page 18 for their location). PCI slot numbers are also indicated on the system
board itself.
program (refer to the system board diagram on
2 System Features
Accessory Boards
program. You need to
33