Coleman 8100 Series Product Manual page 11

4. Remove the two screws holding the bezel and
valve in place. Remove bezel from the front of
the side burner (Fig. 38).
5. Remove the two screws holding the side
burner LP valve assembly in place. This will
free up the assembly (Fig. 39 & 40).
6. Disconnect the igniter wire from the side burner
electrode (Fig. 40).
7. Holding the assembly securely, remove side
burner valve assembly from casting. Replace
with new side NG side burner valve
assembly (Fig. 41 & 42).
Natural Gas Conversion Instructions
Screws
Igniter Wire
Side Burner Valve Assy
Casting
Side Burner Valve Assy
Casting
Fig 38
Fig 39
Fig 40
Fig 41
Fig 42
11