NetComm NB6 Quick Start Manual page 5

SectioN 4
By default wireless is activated on your router and a minimum security level has been enabled to help prevent
unauthorised wireless access. The default wireless security enabled is 64-bit WEP and the default WEP key is:
a1b2c3d4e5.
To connect wirelessly from a laptop or PC, first go to Control Panel > Network Connections. Right click on
Wireless Network Connection and select View Available Wireless Networks.
Click on the connection named Wireless and click on Connect.
Note: if you are unable to see any wireless network connections in the list please visit the NetComm Knowledge Base for troubleshooting steps:
http://kb.netcomm.com.au/
Wireless > General Information/Troubleshooting
Now you will need to enter the Network key (or WEP key, default is a1b2c3d4e5)
You should now have wireless connection through your router.
YML853 Rev1
www.netcomm.com.au
SettiNg uP WireLeSS
(NB6W & NB6PLuS4W oNLy)
NB6, NB6W, NB6Plus4, NB6Plus4W Quick Start Guide NB6, NB6W, NB6Plus4, NB6Plus4W
5