Getting On-Line - NetComm NB6 Quick Start Manual

SectioN 3
Before you start, the ADSL & at least one of the ethernet or USB lights on the router must be on. Refer to
Section 8 – Troubleshooting of this Guide to resolve any issues.
Step 1 go to the 'connect to internet' Page
See Q in Section 8 – Troubleshooting, if after several minutes the message "Your DSL router is not ready to connect" still shows.
Once connected the screen changes to display the on-line time. The PPP light on the front panel of the router
will come on, indicating that you are online. Click Disconnect only if you wish to disconnect manually.
You are now successfully connected to the Internet.
Your Internet account user name & password will be saved automatically.
If previously the computer had a dial-up modem for Internet connection, check your browser setting. The
system may still try to communicate through the previous connection. In Internet Explorer, go to Tools–Internet
options–Connections, select Never dial a connection. Close Internet Explorer to take effect.
NB6, NB6W, Nb6Plus4, NB6Plus4W Quick Start Guide
4

gettiNg oN-LiNe

Start your web browser. Enter the default address http://192.168.1.1
Enter admin for both User name and Password.
See Q1 in Section 8 - Troubleshooting if you cannot get this screen.
Next you will be in the Quick Start > Connect to Internet page.
Step 2 enter internet account Details
Enter your Internet account User Name & Password in the exact format as
specified by the ISP. Usually the user name resembles an e-mail address
with suffix @isp.com.au. Make sure the page displays "Your DSL router
is ready to connect", before clicking Connect.
YML853Rev1
www.netcomm.com.au