Advertisement
Quick Links
NM-iHDMI-4x1
The NetMedia® iHDMI™ 4x1 is an intelligent auto-sensing four-port High Definition Multimedia Inter-
face (HDMI) switch. It automatically senses and connects whichever component was last powered up
to provide spontaneous access to multiple HDMI devices such as Satellites, Blu-rays, video game
consoles, or computers. The iHDMI-4x1™ also includes a serial port for automated control and
advanced cable setup. It is perfect for home theaters, boardrooms, schools, and churches. Cascade
additional 4x1 switches to make even larger intelligent arrays (7x1, 10x1, 16x1, etc.).
Product Includes:
1. iHDMI-4x1 Switch Assembly (HDMI Output, 4-HDMI Inputs,
Power Input, Power LED, 4-Input LED's, Select Button, Serial Port).
2. 5V DC 1A Power Transformer (Center Conductor Positive).
Power Input
5V DC 1A
HDMI Inputs 1-4
Connect to HDMI sources.
Power LED
Indicates Power
Input LED's 1-4
ON indicates available input,
PULSING indicates selected input.
FEATURES
HDMI v. 1.3a 4-input 1-output switch
Auto-senses and connects when source turns on
DVI/HDMI computer resolution up to 1920x1200
480i, 480p, 720p,1080i, 1080p, & Deep Color
Manual override source-select button
Cascade multiple units for 7x1, 10x1, 16x1, etc.
Serial port for computer and automated control
Equalization/pre-emphasis for long cable runs
1 year limited warranty
© 2008 NetMedia Inc. All rights reserved. NetMedia, iHDMI, and iHDMI-4x1 are either registered trademarks or trademarks of NetMedia, Inc. Any other trademarks or trade names mentioned are the property of their respective owners.
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: sales@netmedia.com www.netmedia.com
Intelligent HDMI Switch
4x1 HDMI 1.3a Auto-Sensing Switch
SPECIFICATIONS
Output Signal/Connector:
Input Signal/Connectors:
Supported Formats:
Serial Port:
Power Requirement:
Power Connector:
Size:
Weight:
HDMI OUT
Connects to HDMI
display device.
Female DB9 connects to
RS232 device such as PC
for programmatic control.
Select Button
Manually selects
HDMI input source.
HDMI 1.3a
4 - HDMI 1.3a
480i, 480p, 720p,1080i, 1080p, Deep Color
RS232c, 9600 baud, N, 8, 1
5V DC 1A
4.0mm OD, 1.7mm ID, center positive
3.9" long x 5.5" wide x 0.9" high
8.0 oz.
(subject to change without notice)
MAN-iHDMI-4x1
Serial Port
REV0804B
Advertisement
Related Manuals for NetMedia NM-iHDMI-4x1
Summary of Contents for NetMedia NM-iHDMI-4x1
- Page 1 The NetMedia® iHDMI™ 4x1 is an intelligent auto-sensing four-port High Definition Multimedia Inter- face (HDMI) switch. It automatically senses and connects whichever component was last powered up to provide spontaneous access to multiple HDMI devices such as Satellites, Blu-rays, video game consoles, or computers.
-
Page 2: Setup Procedures
NM-iHDMI-4X1 Setup Procedures: 1. Connect the 5V DC 1A power transformer to the iHDMI Power Input connector. Connect the other end of the power transformer to an AC outlet. 2. Use an HDMI cable to connect the output of each source to one of the four iHDMI Inputs. Use another HDMI cable to connect the iHDMI Output to the display device (Figure 1). - Page 3 Type of Equipment: HDMI Switch Model: NM-iHDMI-4X1 to which this declaration relates are in conformity with the Title 47 of the US Code of Federal Regulations, Part 15 covering Class B digital devices.
- Page 4 When satisfied, save the setting (”W”) and place the unit back in auto mode (”A”). Q- I don’t like the settings I saved through the Serial Port, what can I do to reset the switch? A- You can reset the factory defaults by holding the Select Button while applying power. You can also reload factory defaults through the Serial Port with the Default Settings (“D”) command and then...
Need help?
Do you have a question about the NM-iHDMI-4x1 and is the answer not in the manual?
Questions and answers