Technical Data; Initial Operation - Macherey-Nagel QUANTOFIX Relax Quick Start Manual

Technical data

Specification
Size
Weight
Power supply
Operating conditions:
Pollution degree:
Protection Class:
Overvoltage category
Transport condition
Storage condition

Initial operation

Step 1: Switch on device
Multiple hazards: Only qualified personnel should carry out instructions described in this
step.
Risk of electric shock: Make sure that the power cord is not damaged. Check the
suitability of the power source for the equipment.
Risk of injury due to the danger of tipping over due to slipping. Place the device on a flat
surface. Do not stack the device.
Fire hazard: Take care not to overload the mains socket. There is a risk of
overload and fire.
Make sure that the power cord is not damaged. Check that the power source used is
suitable for the equipment.
Test strip reader QUANTOFIX
4
Description
7.5 cm × 16 cm × 20 cm (H × W × D)
710 g (without batteries and power pack)
External power pack 100–240 V, Output 9 V, 1.5 A
Alternative: battery operation with 6 mignon batteries 1.5 V (AA)
10 °C – 40 °C; 20 % – 80 % rel. humidity (non‑condensing), up
to 3000 m
2
Device: III
Power supply: I
Device: II
Power supply: I
‑10–45 °C, max. 80 % humidity (non‑condensing)
3–40 °C, max. 80 % humidity (non‑condensing)
CAUTION
WARNING
CAUTION
WARNING
Relax 1.0, 02.2022
®