Table of Contents
Advertisement
When a password has been enabled, you will be prompted to enter it
every time you try to enter Setup. This prevents an unauthorized
person from changing any part of your system configuration.
Additionally, when a password is enabled, you can also require the
BIOS to request a password every time your system is rebooted. This
would prevent unauthorized use of your computer.
You determine when the password is required within the BIOS
Features Setup Menu and its Security option (see Section 3). If the
Security option is set to "System", the password will be required both at
boot and at entry to Setup. If set to "Setup", prompting only occurs
when trying to enter Setup.
4.13 Auto Configuration with Optimal
Settings
When you press <Enter> on this item you will get a confirmation dialog
box with a message shown below. This option allows you to
load/restore the BIOS default values permanently stored in the BIOS
ROM. Pressing 'Y' loads the BIOS default values for the most stable.
AMIBIOS HIFLEX SETUP UTILITY – VERSION x.xx
(C)2001 American Megatrends, Inc. All Rights Reserved
Power Management Setup
Load high performance settings (Y/N) ? N
Change Supervisor Password
Auto Configuration with Optimal Settings
Auto Configuration with Fail Safe Settings
Load configuration settings giving highest performance
ESC:Exit
PASSWORD DISABLED.
Standard CMOS Setup
Advanced CMOS Setup
Advanced Chipset Setup
Save Settings and Exit
Exit Without Saving
:Sel
F2/F3: Color
F10: Save & Exit
43
Advertisement
Table of Contents
