Related Manuals for Cameo OPUS X WASH
Summary of Contents for Cameo OPUS X WASH
- Page 1 USER´S MANUAL BEDIENUNGSANLEITUNG MANUEL D´UTILISATION MANUAL DE USUARIO INSTRUKCJA OBSŁUGI MANUALE D´USO OPUS X WASH ® WASH MOVING HEAD CLOXW...
- Page 2 CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO ENGLISH ESPAÑOL SAFETY INFORMATION MEDIDAS DE SEGURIDAD INTRODUCTION INTRODUCCIÓN CONNECTIONS, OPERATING AND DISPLAY ELEMENTS CONEXIONES, ELEMENTOS DE MANEJO Y ELEMENTOS OPERATION DE VISUALIZACIÓN W-DMX™ MANEJO W-DMX™ STATUS W-DMX™ CONTROL MENU (Control) ESTADO W-DMX™...
- Page 3 This device was developed and produced under the highest standards of quality in order to ensure smooth operation for many years. Please read these operating instructions carefully so that you can use your new Cameo Light product quickly and optimally. You can find more information on Cameo Light on our website WWW.CAMEOLIGHT.COM.
- Page 4 33. Dust and other debris within the device may damage it. The device should be serviced or cleaned regularly by qualified specialists depending on the environmental conditions (dust, nicotine, smoke, etc.) in order to avoid overheating. 34. The distance to combustible materials must be at least 0.5 m. 35.
- Page 5 INTRODUCTION MOVING HEAD OPUS SERIES CLOXW CONTROL FUNCTIONS • 29-channel and 48-channel DMX control • Art-Net • sACN • W-DMX™ • RDM-enabled • Master / slave operation • Standalone functions FEATURES • 750 W LED • CMY + CTO color mixture •...
- Page 6 POWER OUT Neutrik powerCON TRUE1 mains output socket. Facilitates power supply to other CAMEO lights. Ensure that the total power consumption of all devices connected to the device does not exceed the given ampere (A) value. FUSE Fuse holder for 5 x 20 mm micro fuses.
- Page 7 MENU / SELECT / ENTER Rotary-push encoder for navigating in the editing menu, adjusting system settings and changing values and status in the corresponding menu items. Starting from the main display, press the encoder to enter the main menu. Select the individual menu items in the main menu (Control, Settings, Info, etc.) and in the sub-menus by turning the encoder and confirm the selection by pressing the encoder.
- Page 8 48ch Mode When the lamp is correctly connected to the mains supply, the Cameo logo is shown on the display during start-up and motor reset along with details of the device model. After this process, the spotlight is ready for operation and the previously activated operating mode is Next: launched.
- Page 9 Back Enter 48ch Mode Next: MAIN DISPLAY DMX AND W-DMX OPERATING MODE The top line of the display shows whether a control signal is available at the device, the middle field shows the DMX start address, the DMX 030°C Fan Auto mode and the address following the start address set in the device, corresponding to the number of channels of the DMX mode.
- Page 10 IP Address 192.168.000.150 Subnet Mask 255.255.255.000 030°C Fan Auto MAIN DISPLAY SLAVE AND STATIC MODE The top line of the display shows whether a control signal is available on the device and the middle field shows the SLAVE or STATIC mode with the selected scene (Run Scene x).
- Page 11 CONTROL MENU (Control) The control menu enables selection of the various operating modes and their settings in the relevant sub-menus. DMX OPERATION VIA XLR INPUT Starting from the main display, press the rotary-push encoder to enter the main menu. Select the Control menu by turning and pressing the encoder.
- Page 12 Settings DMX Address DMX Address Info WDMX DMX Mode DMX Mode 48ch Service 55ch ArtNet Receive Receiver OPERATION VIA ART-NET PROTOCOL sACN Quicklight Starting from the main display, press the rotary-push encoder to enter the main menu. Select the Control menu by turning and pressing the W-DMX Standard Slave encoder.
- Page 13 Service DMX Mode 55ch DMX Mode 48ch ArtNet Control Protocol WDMX Protocol WDMX sACN Quicklight W-Transmitter W-Transmitter Slave Settings Help W-DMX Standard W-DMX Standard Static DMX Address DMX Address Info WDMX Information on the sub-menu items in the sACN menu and the relevant setting options can be found in the table below. DMX Mode DMX Mode 48ch...
- Page 14 Information on the sub-menu items in the Static menu and the relevant setting options can be found in the tables below. Protocol Static Select by turning, confirm by pressing, change value by turning, confirm by pressing. Back with BACK. Run Scene Scene selection 1–8 Record Scene...
- Page 15 In menu: Each area works as button for Info navigating Push & turn right to jump to the Service latest selected menu point Quicklight Push BACK for 3 seconds to jump to Back Enter the home screen without saving Help Cameo Opus XW...
- Page 16 Motor Pan Reverse Pan movement direction does not reverse Pan movement direction reverses Tilt Reverse Tilt movement direction does not reverse Tilt movement direction reverses Pan Angle 630° pan angle 540 ° pan angle Feedback Automatic position correction deactivated Automatic position correction activated Color Status Default color wheel rotation at color change...
- Page 17 Motor Pan Reverse Does not reverse pan direction Reverses pan direction Tilt Reverse Does not reverse tilt direction Reverses tilt direction Pan Angle 630° pan angle 540° pan angle Feedback Automatic position correction is disabled Automatic position correction is enabled Colour Stand Standard rotation of colour wheel on colour change...
- Page 18 RDM Unique Identifier Cameo Show DMX values Displays the applied DMX values Opus XW Error info Error display in case of malfunction DMX Table 29 ch Shows the DMX tables 48 ch Cameo® is a brand of the Adam Hall Group www.adamhall.com...
- Page 19 Password For service purposes only Reset Settings Test Info Cameo® is a brand of the Adam Hall Group www.adamhall.com QUICKLIGHT LED Calibration Service Reset Service Runtime Set up a scene quickly and easily using the basic Moving Head functions without an external controller. Starting from the main display, press...
- Page 20 Push BACK for 3 seconds to jump to Back Enter the home screen without saving Help Cameo® is a brand of the Adam Hall Group www.adamhall.com Cameo SET-UP AND INSTALLATION Opus XW Thanks to its integrated rubber feet, the spotlight can be positioned in a suitable location on a firm and level surface. Traverse installation can be achieved with the help of two Omega brackets, which are attached to the base of the device .