Installation - Monster iCruze MPC FX IC-BMW2 Installation & User Manual

INSTALLATION

Installation Diagram/ Location Overview
Review the installation guide that came with iCruze for installation
steps required prior to Interface Cable/Module installation.
Step 1
WARNING
:
������������������� IF YOU HAVE NOT ALREADY DISCONNECTED THE NEGATIVE
����������
TERMINAL OF THE BATTERY, DO SO NOW. WE HIGHLY
RECOMMEND CONSULTING YOUR OWNERS MANUAL FOR
������
��������� VEHICLE SPECIFIC INSTRUCTIONS AND PRECAUTIONS
������
REGARDING BATTERY CONNECTIONS.
����������������������
Get the Interface Cable from the main iCruze package. There are
IM-BMW1
����������
a pair of wires on the Interface Cable, one yellow and one blue with
����
a white stripe. The yellow wire needs to be connected to constant,
unswitched power. The blue and white wire needs to be connected
to accessory power.
�������
These should be available from the car stereo wire harness.
������
Consult your car's factory service manual for the location of this wire.
An MECP certified installation professional can also help.
To prevent cutting the car's wire harness, a T-Tap-type connector
is recommended (be certain to use the proper size T-Tap to ensure
a reliable connection).