Table of Contents
Advertisement
Installation Diagram/ Location Overview
iCruze LCD Display
(optional)
iCruze Interface Cable
(Included)
Interface
Cable
Interface
Module
FX IC-FD3
iCruze
iPod
Factory Tuner/
Amplifier
INSTALLATION
Review the installation guide that came with iCruze for installation
steps required prior to Interface Cable/Module installation.
WARNING
:
IF YOU HAVE NOT ALREADY DISCONNECTED THE NEGATIVE
TERMINAL OF THE BATTERY, DO SO NOW. WE HIGHLY
RECOMMEND CONSULTING YOUR OWNERS MANUAL
FOR VEHICLE SPECIFIC INSTRUCTIONS AND PRECAUTIONS
REGARDING BATTERY CONNECTIONS.
Step 1
Get the Interface Cable from the main iCruze package. The yellow
wire needs to be connected to constant, unswitched power. This
should be available from the car stereo wire harness. Consult your
car's factory service manual for the location of this wire. An MECP
certified installation professional can also help.
To prevent cutting the car's wire harness, a T-Tap type connector
is recommended (be certain to use the proper size T-Tap to ensure
a reliable connection).
Step 2
WARNING:
DO NOT ATTEMPT TO MAKE THIS CONNECTION UNLESS YOU
HAVE THE EXPERIENCE AND KNOWLEDGE TO DO SO. INCORRECT
CONNECTIONS MAY CAUSE MALFUNCTION OF CAR STEREO
AND OTHER ELECTRICAL SYSTEM COMPONENTS. CONSULT AN
MECP CERTIFIED INSTALLER IF YOU DO NOT HAVE THE TOOLS OR
KNOWLEDGE TO MAKE THIS CONNECTION.
Connect the free end of the yellow wire to constant power.
Advertisement
Table of Contents
