Lamp Replacement - Navitar EX Instruction Manual

Lamp Replacement for Recessed Model
Replacing Lamps
Lamp replacement in the Recessed Hi-Lite light is very
simple. Just follow these easy instructions.
Remove Lamp
1. Turn off power and allow lamps to cool before han-
dling.
2. Hold the top/front edge of the diffuser assembly in
place. Loosen both captive screws.
3. Gently lower the top portion of the diffuser assembly
until it clears the bottom of the main enclosure.
4. Pull the diffuser assembly out and away from the
enclosure.
5. Lift up on end of lamp being replaced until you hear a
click.
6. Grip socket-end of lamp and pull it out and away from
socket.
23