Lamp Replacement - Navitar EX Instruction Manual

Lamp Replacement for XL, EX & NX Models
Replacing Lamps
1. Turn the power switch off and allow the lamps to cool
before handling.
2. Swing open the right, front corner panel of the unit,
then carefully slide out and remove the diffuser panel.
3. Hold the lamp at positions "A" and "B" (see below).
Lift "A" straight up until the lamp reaches a 45° angle,
then lightly push "B" down and remove the lamp.
4. To install a new lamp, use replacement lamp part #
8-13698 or 8-13699, and reverse the process above.
19