Parameters
Parameters
The following table lists the power module parameters.
Table 2-1
Diagnostics: No load voltage
The parameters are explained below.
Diagnostics: No load voltage
Use this parameter to enable a diagnostic message because there is no load voltage.
If there is no load voltage only the diagnostic message of the affected power module is sent
to the DP master. The SF error LEDs of all modules in the relevant potential group light.
Power module PM-E DC24..48V (6ES7138-4CA50-0AB0)
Manual, 04/2007, A5E01119980-01
Parameters for power modules
PM-E 24 to 48 VDC
Range of values
disable/enable
Disable
Default setting
Applicability
Power module
2
11