Advertisement
Congratulations on your purchase of this Traeger Digital Thermostat Kit, BAC331. Once
installed, the Digital Thermostat Kit will add a new level of control to your Grill and
provide you with delicious food and years of cooking enjoyment.
When you un-box the Digital Thermostat Kit, make sure you have, and can identify all of
the following parts:
(1) Digital Thermostat Control (P/N BAC288)
(1) 7" RTD - Temperature Sensor Rod (P/N BAC194)
(1) Screw (1/2" long)
(1) Lock Nut
(1) Meat probe 1 for controller BAC288 (P/N BAC289
(1) Meat probe 2 for controller BAC288 (P/N BAC329)
(1) Silicone Grommet (Meat Probe) (P/N BRN249)
(4) Wire ties (P/N HDW128)
The easy installation process includes:
1) Removing the existing 3-Speed Smoker Control.
2) Installing the RTD.
3) Wiring and Mounting the Digital Thermostat Control.
4) Drilling a hole and mounting silicone grommet. (Optional)
Follow these step by step instructions and you'll be cooking in no time!
Before attempting to remove or install the
control for any reason disconnect the power
cord from source. Failure to disconnect from
power source could result in electrical shock,
burn or cause death.
INTRODUCTION
DANGER
Advertisement
