Advertisement
PARTS DIAGRAM
1.
FRONT GUARD
2.
BLADE
3.
BLADE SCREW
4.
MOTOR
5.
REAR GUARD
6.
NUT
7.
WASHER
8.
WASHER
9.
SCREW
10.
CONTROL BOX
OPERATING INSTRUCTIONS
•
Ensure voltage used corresponds with the voltage indicated.
•
Turn the speed control to select desired speed
•
Never touch the blades with hand or any object!
•
Do not pull the cord too hard
0 - Off
1- Low speed
2 - Medium speed
3 - High speed
Note: The fan is tilt adjustable. To adjust the tilt angle of the fan, loosen the tilt adjust screws on
the sides of the fan. Tilt the main body to your required angle and tighten the screws again.
11.
SWITCH
12.
CONTROL BOX
13.
PROTECTS THE COIL
14.
CORD HOLDER
15.
POWER CORD
16.
CLOSE-END CONNECTOR
17.
PARTICLE
18.
TUBE BASE
19.
LOCK NUT
20.
SCREW
4
Advertisement
