Toro Groundsmaster 1200 Series Installation Instructions Manual page 4

Figure 3
1. 51 mm (2 inches)
2. 127 mm (5 inches)
2. Measure 127 mm (5 inches) from the end of the
axle frame tube, and mark the tube as shown
in Figure 3B.
3. Measure 44.5 mmm (1-3/4 inches) from the top
of the axle frame tube, and mark the tube as
shown in Figure 3C.
4. Centerpunch the marks where they intersect
(Figure 4).
g284109
3. 44.5 mmm (1-3/4 inches)
1. 11 mm (7/16 inch) drill bit
5. Drill the centerpunch marks with a 11 mm (7/16
inch) drill bit (Figure
tube.
6. Repeat steps 1
axle frame tube
4
Figure 4
4) through both walls of the
through 5 at the other end of the
g284107