Dürr Technik SICOLAB mini ENDO Installation And Operating Instructions Manual
Hide thumbs
Also See for SICOLAB mini ENDO:
Subscribe to Our Youtube Channel
Related Manuals for Dürr Technik SICOLAB mini ENDO
Summary of Contents for Dürr Technik SICOLAB mini ENDO
- Page 1 SICOLAB mini ENDO Installation and operating instructions 1015100100L02 *1015100100L02*...
- Page 3 Contents Contents Pressure vessel test ..Commissioning ....Remove the packaging ..Important information Quick-release coupling –...
- Page 4 Contents 13.4 Addresses worldwide ..1015100100L02 2107V005...
-
Page 5: About This Document
Important information The signal word differentiates between four levels Important information of danger: – DANGER Immediate danger of severe injury or death About this document – WARNING Possible danger of severe injury or death These installation and operating instructions rep- –... -
Page 6: Copyright Information
This way up / store and transport in an Intended purpose upright position The unit is an oil-free compressor for com- pressed air. SICOLAB mini ENDO is intended to be used with attachments for the drying of MIC Fragile, handle with care instruments and their accessories, including hoses, valves, Luer Lock adapters and cannulas. -
Page 7: Essential Performance Char- Acteristics
2.10 Transportation and storage acteristics The original packaging provides optimum protec- The SICOLAB mini ENDO unit does not have any tion for the unit during transport. essential performance characteristics in accord- ance with EN/IEC 60601-1 section 4.3. Dürr Technik will not accept any responsi-... - Page 8 Important information Ambient conditions during storage and transport Air pressure 100 to 1100 Please refer to the labels on the packaging pad- ding. 2.11 Disposal Unit The unit must be disposed of properly. Within the European Union, the unit must be disposed of in accordance with EU Directive 2012/19/EU (WEEE).
-
Page 9: Product Description
Fuses (mains fuse) SICOLAB mini ENDO ........ - Page 10 Product description Accessories for the compressed air pistol The compressed air pistol is available as an accessory for SICOLAB mini ENDO units and is operated with compressed air. Operating instructions for safe handling of the compressed air pistol and cleaning and reproc- essing instructions are available as a download "Operating instructions for cleaning pistols...
-
Page 11: Technical Data
Product description Technical data Basic data Electrical data SICOLAB mini ENDO A038 1015100005 Electrical frequency Nominal voltage Rated power P1 (kW) Nominal current Nominal pressure bar / MPa 1 / 0.1 1 / 0.1 Mains fusing General data Pressure vessel volume... -
Page 12: Operation
Product description Operation Evaluation of conformity The unit draws in atmospheric air and com- This unit has been subjected to a conformity presses it. The oil-free compressed air is then assessment procedure in accordance with the transported to the pressure vessel. The oil-free current relevant European Union guidelines. -
Page 13: Type Plate
Product description Type plate The type plate is located on the rear of the unit. REF Order number Fig. 2: SICOLAB mini ENDO – view of the front Serial number This information is also required when order- Quick-release coupling ing spare parts. -
Page 14: Installation/Setup Room
Assembly The unit must only be operated on a stable, even Assembly base. The unit must not be used as a climbing aid. Danger of breakage! Place a collector tray under the condensate drain (14) on the rear of Requirements the unit to collect any condensate that is blown out. -
Page 15: Electrical Installation
Assembly Commissioning Condensate When air from the surrounding atmosphere is Remove the packaging compressed, different amounts of condensate will accumulate in the pressure vessel depending The unit is securely protected with packaging on the humidity and temperature of the air. This material to ensure safe transportation. -
Page 16: Overtemperature Protection
Assembly DANGER WARNING Risk of electric shock due to dam- Risk of damage to the safety valve aged power cord or plug Risk of explosion of the pressure vessel Electric shocks can cause severe inju- and pressure hoses due to a defective ries. -
Page 17: Switching The Unit On/Off
Usage Storage of the unit Usage WARNING Risk of explosion of the pressure tank 10 Operation and pressure hoses The pressure tank and the pressure ❯ Prior to working on the unit or in case of hoses must be vented before they are danger, disconnect it from the mains. - Page 18 CAUTION pistol Risk of material damage due to The compressed air pistol is available as attachments becoming detached from an accessory for SICOLAB mini ENDO the compressed air pistol during oper- units and is operated with compressed ation. air. If the attachments become detached...
-
Page 19: Maintenance Schedule
Usage 11 Maintenance De-energise the unit prior to working on it or in the event of potential danger (e. g. pull the mains plug) and prevent it from being switched back on again. Perform an inspection and maintenance no later than after one year or 5000 operating hours. If needed, service the unit at shorter intervals. -
Page 20: Checking The Fan
Usage 11.2 Disinfecting and cleaning the surfaces The surface of the unit can be disinfected with disinfectant wipes. Preparations from the group of surface disinfectants should be used for this purpose. For reasons of materials compatibility, preparations based on the following agents are suitable: - Aldehydes - quaternary ammonium compounds. -
Page 21: Troubleshooting
Troubleshooting Troubleshooting 12 Tips for operators and service technicians Perform an inspection and maintenance no later than after one year or 5000 operating hours. If needed, service the unit at shorter intervals. Maintenance and repair work may be done only by Dürr Technik or Dürr Technik-qualified per- sonnel/service engineers. - Page 22 Contact Contact 13 Addresses 13.1 Returns / Repairs Dürr Technik GmbH & Co. KG Pleidelsheimer Straße 30 74321 Bietigheim-Bissingen -Germany- WARNING Risk of explosion of the pressure tank and pressure hoses The pressure tank and the pressure hoses must be vented before they are stored or transpor- ❯...
- Page 24 Dürr Technik GmbH & Co. KG Pleidelsheimer Strasse 30 74321 Bietigheim-Bissingen Germany Fon: +49 7142 9022-0 www.duerr-technik.com office@duerr-technik.de...
Need help?
Do you have a question about the SICOLAB mini ENDO and is the answer not in the manual?
Questions and answers