Advertisement
ELAN HOME SYSTEMS
Multiple Sensors/Multiple Relay Controlled
Devices
In this application, either the SENSE1 or SENSE2 input will
trigger both R1 and R2 outputs. For the SENSE1 port, if either
the Contact Sensor or the Light/LED Sensor is activated, both
R1 and R2 will become active; the Screen will lower and the
Drapes will close. For SENSE2, both the Audio Sensor and
Video Sensor must be activated for R1 and R2 to become
active. This application utilizes the LINK feature of the SIM2
to activate both on-board relays . Set the SENSE1 DIP switch
to OR, the SENSE1 DIP switch to AND, and the LINK DIP
switch to ON.
Screen
-
+
© ELAN Home Systems 2006 • All rights reserved.
SIM2
INSTALLATION MANUAL
Drapes
-
+
CONTACT SENSOR
LED/LIGHT SENSOR
VIDEO SENSOR
AUDIO SENSOR
Page 11
Advertisement
