Channel (Mr) Mode; Chapter6. Advanced Features; Frequency Scanning; Channel Scanning - Radioddity GA-5E User Manual

5.6 Channel (MR) mode

The use of Channel (MR) mode is dependent on actually having programmed in some
channels to use.
Once you have channels programmed and ready, you can use the ▲/▼ keys or the encoder
to navigate between channels.
6. ADVANCED FEATURES

6.1 Frequency scanning

This func�on can scan the frequency.
a. In frequency mode, press [#SCAN] key for more than 2 seconds. The radio will start scanning the frequency according to
the set frequency step.
b. You can change the scanning direc�on with the ▲/▼ keys.
c. Press [#SCAN] key to stop the scanning.
Note: for Scan mode, see Menu No.20.

6.2 Channel scanning

This func�on can scan the channels.
a. In channels mode, press [#SCAN] key for more than 2 seconds. The radio will start scanning according to the channel you
set.
b. You can change the scanning direc�on with the ▲/▼ keys.
c. Press [#SCAN] key to stop scanning.
Note: for Scan mode, see Menu No.20.

6.3 CTCSS scanning

The func�on allows scanning the frequencies with CTCSS tone enabled.
17