Table Of Contents - Toshiba RBM-Y1121FUPE Installation Manual

Flow Selector unit Single-port type (hereafter "Flow Selector unit")
Thank you very much for purchasing TOSHIBA Super Heat Recovery Multi Advance (SHRM-A) Air conditioner.
Please read this manual carefully before using your Flow Selector unit.
• When installing an indoor or outdoor unit, follow the Installation Manual supplied with the unit.
• To connect the Flow Selector unit to an outdoor unit with pipes, a branching joint or header is required.
Choose one according to the capacity of the units.
ADOPTION OF R32 REFRIGERANT
The Super Heat Recovery Multi Advance has adopted a refrigerant HFC (R32) which does not destroy the
ozone layer. This Flow Selector unit is for the R32 refrigerant only. Be sure to use an indoor or outdoor unit in
combination with the R32 refrigerant.
CONTENTS
Accessory parts and Parts to be procured locally ..... ........... .......... ... 2
1
PRECAUTIONS FOR SAFETY . .. .. . . .. . .. . .... .......... ........... .......... 2
2
SELECTION OF INSTALLATION PLACE ....... ........... .......... ....... 5
3
INSTALLATION OF FLOW SELECTOR UNIT ......... ........... .......... . 7
INSTALLATION OF BATTERY KIT . . .. . .. . .... .......... ........... .......... 8
4
REFRIGERANT PIPING .. ... .. ... .. . . .. . .. . .. ...... .......... ........... ....... 9
5
ELECTRICAL CONNECTION .. ... . . .. . .. . .. .......... ........... ........... . 10
EN-1
1
EN-2