Before Using For The First Time; Initial Use; Rinse Aid System; Rinse Aid - Bosch 300 Series Use And Care Manual

8 Before using for the

Before using for the first time

first time
Before using for the first time
8.1 Initial use
Before the first use, or after a fac-
tory reset, you will need to config-
ure the settings.
Tip: Connect your appliance to a
mobile device. You can conve-
niently change all settings using
the Home Connect® app.
→ "Home Connect® quick start",
Page 30
Requirement: The appliance has
been installed and connected.
Add rinse aid. → Page 19
1.
Switch on the appliance.
2.
→ Page 25
Set the amount of rinse aid.
3.
→ Page 19
Add detergent.
4.
Start the Program with the
5.
highest cleaning temperature
without dishware.
To remove any marks from wa-
ter or other residues, we rec-
ommend you operate the appli-
ance without dishware before
using it for the first time.
Tip: You can change these set-
tings and other Basic settings
→ Page 28 at any time.
9 Rinse aid system

Rinse aid system

Rinse aid system
9.1 Rinse aid
For optimum drying results, use

rinse aid.

Only use rinse aid intended for
household dishwashers.
Before using for the first time en-us
Adding rinse aid
If the rinse aid refill indicator lights
up, fill the dispenser with rinse
aid. Only use rinse aid intended
for household dishwashers.
Press the catch on the lid of the
1.
dispenser for rinse aid
lift ⁠ .
Add rinse aid up to the max
2.
mark.
If rinse aid spills out, remove it
3.
from the tub.
Spilled rinse aid can cause ex-
cessive frothing during the
wash cycle.
Close the lid of the dispenser
4.
for rinse aid.
a The lid clicks into position.
9.2 Setting the amount of
rinse aid
If there are streaks or water spots
on dishware, change the amount
of rinse aid.
Press
1.
and
2
1
max
⁠ .
19