Bosch 300 Series Use And Care Manual page 40

en-us Troubleshooting
Issue
Detergent residue in
the appliance
Water spots on
plastic parts.
Wipeable or water-
soluble coatings in-
side the appliance
or on the door.
There are stubborn
white coatings on
the dishware, inside
the appliance or on
the door.
40
Cause and troubleshooting
Lid of the detergent dispenser is blocked by items
of dishware and will not open.
Arrange dishware in the upper rack so the tab
1.
collecting tray is not obstructed by dishware.
→ "Loading dishware", Page 23
Items of dishware are blocking the dispenser
lid.
Do not place dishware or fragrance dispensers
2.
in the tab collecting tray.
The lid of the detergent dispenser is blocked by
the tab and will not open.
Position the tab in the detergent dispenser
▶
crosswise, not vertically.
Tabs are used in the quick or short cycle. There is
not enough time for the tab to dissolve.
Select a more intensive Wash cycle or use
▶
Powder detergent.
Detergent may lose its cleaning or dissolving abil-
ity after being stored a long time, or the detergent
is clumped together.
Change your Detergent.
▶
Droplet formation on plastic surfaces is unavoid-
able due to the laws of physics. Water spots are
visible after drying.
Select a more intensive program.
▶
Position dishware at an angle.
▶
→ "Loading dishware", Page 23
Use rinse aid.
▶
→ "Rinse aid", Page 19
There is detergent residue. These coatings can-
not generally be removed with chemicals.
Change your Detergent.
▶
Scrub the appliance by hand.
▶
There is detergent residue. These coatings can-
not generally be removed with chemicals.
Change your Detergent.
▶
Scrub the appliance by hand.
▶
Too little detergent is being used.
Increase the amount of detergent used or
▶
change Detergent .
Selected wash cycle is too light.
Select a more intensive wash program.
▶