Advertisement
Available languages
Available languages
8. Changing fuse
The fuse is located in the fuse holder (7) on the back of
the control box (8), below the mains connection. Before
changing it, pull out the mains plug. After pulling out the
fuse holder (7) you can replace the fuse. Use only the
specified fuse.
9. Specifications
Height of column:
Cross-section of column: 120 x 80 mm (4.7 x 3.1 in.)
Maximum load of
camera carrier:
Camera mounting plate: 130 x 130 mm (5.1 x 5.1 in.)
Mounting thread:
Operating voltage:
Fuse:
Weight (1) - (5):
Mains cable:
10. Other system components
5615 rePRO Base Stand, height approx. 66 cm, (26
in.), with base for column, without base plate
5618 75H Base Stand, height approx. 75 cm (29.5 in.),
5610 base required, without base plate
5610 Base for RSP columns
5616 rePRO Base Plate, 80 x 60 cm (31.5 x 23.6 in.)
5617 rePRO Trans-Illuminator, 5000 K, illuminated area
43 x 48 cm (16.9 x 18.9 in.), 4 x 55 W, with high
frequency operating system
5614 rePRO Wall Mount
4421 rePRO Adapter. For attaching Kaiser enlarger
heads and copy arms of the R1 system to the
RSP columns
5627 Close-Up Adapter. Moves the camera mounting
position for approx. 15 cm (6 in.) downwards.
1/4" mounting thread
5652 RB 570 AX LED Copy Lighting Unit with thermo-
management, 2 x 272 SMD LEDs, 5600 K,
dimmable
5641 Polarizers for 5652, 2 pieces
1.50 m (4.9 ft.)
approx. 15 kg (33 lbs.)
3/8" and 1/4", interchangeable
100 - 240 V, 50/60 Hz
T 4 A
approx.18.3 kg (40.3 lbs.)
approx. 2.50 m (8.2 ft.)
For more information see the Kaiser website at
www.kaiser-fototechnik.de/en/
produkte/artikel.php?nr=5613
Errors and technical modifications excepted.
All data are approximate values.
At the end of their service life, dispose of the
products in accordance with the applicable legal
regulations.
Advertisement
