Download Print this page
Silver King KEFT34-IL Technical Manual And Replacement Parts List

Silver King KEFT34-IL Technical Manual And Replacement Parts List

Mobile freezer

Advertisement

Quick Links

T echnical Manual
and
Replacement Parts List
Mobile Freezer
MODEL: SKEFT34-IL 115V
1600 Xenium Lane North, Minneapolis, MN 55441-3787
Phone (800) 328-3329 / (763) 923-2441
FORM NO. 45787 REV C 03/2020
Specifications Subject to Change Without Notice.
1

Advertisement

loading

Summary of Contents for Silver King KEFT34-IL

  • Page 1 T echnical Manual Replacement Parts List Mobile Freezer MODEL: SKEFT34-IL 115V 1600 Xenium Lane North, Minneapolis, MN 55441-3787 Phone (800) 328-3329 / (763) 923-2441 FORM NO. 45787 REV C 03/2020 Specifications Subject to Change Without Notice.
  • Page 2 UNCRATE AND INSPECT FOR DAMAGE Upon delivery of your new Silver King unit, uncrate at once to inspect for possible freight damage following the instructions printed on the exterior of the container. Report any damages to the carrier responsible for transportation and promptly present a written claim for any evidence of mishandling.
  • Page 3: Installation

    Your Silver King freezer is equipped with an eight (8) foot power cord. Any attempt to modify the plug will void the warranty, terminate the manufacturers responsibility, and could result in serious injury.
  • Page 4: Operation

    OPERATION Initial Start Up After satisfying the installation requirements, the freezer is ready to operate. The unit will start when the power cord is connected to a live electrical receptacle. If the Compressor and Condenser Fan are not running when the unit is initially connected to power, check to make sure that the Temperature Control is not set to the ‘off’...
  • Page 6 REPLACEMENT PARTS LIST – SKEFT34-IL ITEM PART DESCRIPTION PART NO BOTTOM COVER INSULATED (SKEFT34 ONLY) 36210 TOP COVER INSULATED (SKEFT34 ONLY) 36214 END PANEL LOUVERED 35920 KIT 2" CASTER 10314-25 KIT 4" CASTER 10314-79 KIT 6" CASTER 10314-75 POWER CORD 115V 36144 CORD WRAP 37173...
  • Page 8 • No returns are accepted without prior written approval from the factory. An of delivery and installation charges, if it is found in Silver King’s review to RMA (Returned Merchandise Authorization) form must be completed and be inefficient or inoperative due to defects in material or factory then approved by Silver King.