1.5.7 Interfaces
Drive support
Attachment
1.5.8 EBOD Module Specification
Dimensions
(internal)
Mounting
Connectors
1.5.8.1
LED Functions
Table 1–4
LED Functions
Phystate Green
System Health
1.5.9 Drive Carrier Module Specification
Please contact your supplier for details of approved drives.
Important
Operating SAS 16-bay drive enclosure subsystems with non-approved drives may invalidate the
warranty.
Module Dimensions
Weight
Operating Temperature
Power Dissipation
LEDs
drive carrier specification
• 1 x SAS 4 lane 3Gb wide port Host connector
• 1 x SAS 4 lane 3Gb wide port Expansion connector
103mm x 267mm (4 inches x 10.5 inches)
– component board area: 103mm x 240mm (4 inches x 9.5 inches)
rear, single bays 3 and/or 4
• Host Port:
– 1 x SFF8470 connector (4 lane)
• Expansion Port:
– 1 x SFF8470 connector (4 lane)
LED Functions
State
On
Flashing
Off
Red
Green
Flashing Red
Height 29.1mm Width 106.55mm Depth 251 mm
0.98kg (1.0" 36Gb drive)
5° C to 40° C (when installed in an system enclosure with dual Power
Supply/Cooling Modules)
19 Watts maximum
– Drive Installed/Activity
– Drive Fault
(Figure
1–2)
Description
Ready
Active
Not Ready
Fault
Good
POST
Introduction
11