Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Knightsbridge OSHFREC
Summary of Contents for Knightsbridge OSHFREC
- Page 1 INSTALLATION & MAINTENANCE MANUAL OSHFREC...
-
Page 2: General Instructions
These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following product: OSHFREC SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations. -
Page 3: Installation
• This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician • Please isolate mains prior to installation or maintenance • Please note the IP (Ingress Protection) rating of this product when deciding the location for installation •... - Page 4 en the screw on the terminal cover of the power module ring correct polarity is observed, terminate the mains cable Live (Brown), Neutral (B • Loosen the screw on the terminal cover of the power module • Ensuring correct polarity is observed, terminate the mains cable Live (Brown), Neutral oad Live) into the power module (see Fig.
- Page 5 Lift both spring clips on the sides of the fitting and push into the ceiling (see Fig. 3) Fig. 3 • Switch on power and check for correct operation Switch on and check for correct operation OVERRIDE FACILITY RRIDE FACILITY – If the sensor has been wired in conjunction with an external switch the override If the sensor has been wired in conjunction with an external switch, the override function on can be activated by switching off/on twice.
-
Page 6: Sensor Settings
activated by switching off/on twice. The luminaires will remain on for up to 4 hours. After 4 hour ated by switching off/on twice. The luminaires will remain on for up to 4 hours. After 4 hours by switching off/on twice. The luminaires will remain on for up to 4 hours. After 4 hours OVERRIDE FACILITY –... -
Page 7: Warranty
WARNING This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing. Irreparable damage will occur if this instruction is not followed. GENERAL This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities for where facilities exist. - Page 8 Supplied By: (UK) Manufacturer ML Accessories Ltd, Unit E Chiltern Park, Boscombe Road, Dunstable LU5 4LT, www.mlaccessories.co.uk (EU) Authorised Representative nnuks Holding GmbH, Niederkasseler Lohweg 18, 40547 Düsseldorf, Germany, Email: eprel@nnuks.com ML Accessories Limited LU5 4LT www.mlaccessories.co.uk Made in China AVJUL22_V2...
- Page 9 Manufacturers Declaration of Conformity For ML Accessories (Knightsbridge) Electrical products in accordance with CE marking ML Accessories Ltd. Declare that all products have been designed, manufactured, and tested in accordance with the requirements of the relevant legislation CE marking legislation...
- Page 10 Manufacturers Declaration of Conformity For ML Accessories (Knightsbridge) Electrical products in accordance with UKCA marking ML Accessories Ltd. declare that all products have been designed, manufactured, and tested in accordance with the requirements of the relevant legislation UKCA marking legislation UK SI 2016 No.
Need help?
Do you have a question about the OSHFREC and is the answer not in the manual?
Questions and answers