Repeat And Shuffle Play; Operating An Ipod Directly - Passenger Control; Searching For A Track; Searching A Track By Name - Quick-Browzer - Sony CDX-GT707UI Operating Instructions Manual

Repeat and shuffle play

1
During playback, press (3) (REP) or
(4) (SHUF) repeatedly until the
desired setting appears.
Select
TRACK
ALBUM
PODCAST
ARTIST
PLAYLIST
GENRE
SHUF ALBUM
SHUF PODCAST
SHUF ARTIST
SHUF PLAYLIST
SHUF GENRE
SHUF DEVICE
After 3 seconds, the setting is complete.
To return to normal play mode, select "
or "SHUF OFF."
Operating an iPod directly
— Passenger control
You can operate an iPod connected to the dock
connector directly.
1
During playback, press and hold
(MODE).
"MODE IPOD" appears and you will be able
to operate the iPod directly.
To change the display item
Press (DSPL).
The display items change as follows:
Track name t Artist name t Album name t
MODE IPOD t Clock
To exit the passenger control
Press and hold (MODE).
Then "MODE AUDIO" will appear and the play
mode will change to resuming mode.
Notes
• The volume can be adjusted only by the unit.
• If this mode is canceled, the repeat setting will be
turned off.
18
To play
track repeatedly.
album repeatedly.
podcast repeatedly.
artist repeatedly.
playlist repeatedly.
genre repeatedly.
album in random order.
podcast in random order.
artist in random order.
playlist in random order.
genre in random order.
device in random order.
OFF"

Searching for a track

Searching a track by name
— Quick-BrowZer™
You can search for a track in a CD or USB device
easily by category.
1
Press (BROWSE).
The unit enters the Quick-BrowZer mode,
and the list of search categories appears.
2
Rotate the control dial to select the
desired search category, then press it
to confirm.
3
Repeat step 2 until the desired track is
selected.
Playback starts.
To return to the previous display
Press (BACK).
To exit the Quick-BrowZer mode
Press (BROWSE).
Note
When entering the Quick-BrowZer mode, the repeat/
shuffle setting is canceled.
Searching by skip items
— Jump mode
When many items are in a category, you can
search the desired item quickly.
1
Press (SEEK) + in Quick-BrowZer
mode.
The following display appears.
A Current item number
B Total item number in the current layer
Then the item name will appear.
2
Rotate the control dial to select the
desired item or one near the desired
item.
It skips in steps of 10% of the total item
number.
3
Press the select button.
The display returns to the Quick-BrowZer
mode and the selected item appears.
4
Rotate the control dial to select the
desired item and press it.
Playback starts if the selected item is a track.