Repeat And Shuffle Play; Enjoying Music According To Your Mood - Sensme; Before Using The Sensme™ Function; Installing "Sensme™ Setup" And "Content Transfer" In Your Computer - Sony CDX-GT707UI Operating Instructions Manual

Repeat and shuffle play

1
During playback, press (3) (REP) or
(4) (SHUF) repeatedly until the
desired setting appears.
Select
TRACK
ALBUM
SHUF ALBUM
SHUF DEVICE
After 3 seconds, the setting is complete.
To return to normal play mode, select "
or "SHUF OFF. "
Enjoying music according to
your mood — SensMe™
Sony's unique "SensMe™ channels" features
automatically group tracks by channel, and allow
you to enjoy music intuitively.
Before using the SensMe™
function
The following is the basic procedure required to
enjoy the SensMe™ function on the unit.
1 Installing "SensMe™ Setup" and
"Content Transfer" in your computer
First install "SensMe™ Setup" and "Content
Transfer" from the supplied CD-ROM.
2 Registering a USB device using
"SensMe™ Setup"
Connect a USB device to your computer, and
perform registration using "SensMe™ Setup"
to enable the SensMe™ function on this unit.
SensMe ™

Setup

14
To play
track repeatedly.
album repeatedly.
album in random order.
device in random order.
OFF"
SensMe ™ Content
Setup Transfer
Tip
Registration can be performed either along with the
installation procedure or after installation.
3 Transferring tracks to the USB device
using "Content Transfer"
In order to group tracks by channel, track
sound patterns need to be analyzed by 12
TONE ANALYSIS™, which is loaded in
"Content Transfer."
With the USB device connected to your
computer, drag and drop tracks from Windows
Explorer or iTunes, etc., to "Content
Transfer."
Both analysis and transfer of tracks will be
performed by "Content Transfer."
Content
Transfer
4 Connecting the USB device and
enjoying the SensMe™ function on the
unit
Connect the set up USB device. You can then
enjoy "SensMe™ channels" on this unit.
Installing "SensMe™ Setup" and
"Content Transfer" in your
computer
Use of the supplied software ("SensMe™ Setup"
and "Content Transfer") is required to enable the
SensMe™ function on this unit.
Install the software in your computer from the
supplied CD-ROM.
1
Insert the supplied CD-ROM into your
computer.
The Installation Wizard runs automatically.
2
Follow the on-screen instructions to
complete the installation.