Table of Contents
Advertisement
tams elektronik
1.3. Intended use
The loop module is intended for use in model railway layouts as specified in the instructions.
Any other use is not in accordance with the intended use and will result in the loss of the
warranty claim. Intended use also includes reading, understanding and following all parts of
the instructions. The loop module is not intended to be used by children under the age of 14.
1.4. Safety instructions
Note:
!
The loop module contains integrated circuits (ICs). These are sensitive to electrostatic
charging. Therefore, do not touch these components until you have "discharged" yourself.
For this purpose, e.g. a grip on a radiator is sufficient.
Improper use and non-observance of the instructions can lead to incalculable hazards. Prevent
these dangers by carrying out the following measures:
Only use the loop module in closed, clean and dry rooms. Avoid moisture and splash water
in the environment. After condensation has formed, wait two hours for acclimatisation
before use.
Disconnect the loop module from the power supply before carrying out wiring work.
Supply the loop module only with extra-low voltage as specified in the technical data. Use
only tested and approved transformers.
Only plug the mains plugs of transformers into properly installed and fused earthed sockets.
When making electrical connections, ensure that the cable cross-section is sufficient.
Heating of the loop module during operation is normal and harmless.
Do not expose the loop module to high ambient temperatures or direct sunlight. Observe
the information on the maximum operating temperature in the technical data.
Regularly check the operational safety of the loop module, e.g. for damage to the
connection cables.
If you notice damage or if malfunctions occur, disconnect the connection to the power
supply immediately. Send the loop module in for inspection.
1.5. Care
Do not use any cleaning agents to clean the loop module. Only wipe the module dry.
Disconnect the loop module from the power supply before cleaning.
KSM-3
Getting started | 5
Advertisement
Table of Contents
