Connections Ksm-3; Isolating The Terminal Loop From The Layout; Connections - tams elektronik KSM-3 Manual

tams elektronik KSM-3

4. Connections KSM-3

4.1. Isolating the terminal loop from the layout

First isolate the loop completely from the rest of the layout. Arrange the two isolating points
as near to the points as possible.

4.2. Connections

There are two terminal strips for the connection of the rails and a plug-in unit (consisting of a
box header and an appropriate plug-in part) for the connection of the points soldered to the
module which are used to insert and screw on the connecting wires.
Connections KSM-3 | 17