Leveling Adjustment; Water Supply/Purge; Water Supply; Purge - Hoshizaki DB Series Installation & Maintenance Manual

安全提示

6. Leveling Adjustment

Note
Do not put hard object under legs for
leveling ice maker. Make sure the four legs
touching the ground steadily to prevent
vibration during operation.
Screwing home four adjustable parts of the legs

first, and then screwing the legs into ice maker
bottom plate；
Moving ice maker to installation place. Adjusting

legs to ensure the ice maker is leveling.

7. Water supply/Purge

7.1Water supply

Warning
Ice makers must be connected to
potable water supply.
With local potable water quality, determining if a

water treatment system is needed to prevent
sediment formation, filtering out impurities and
removing bleach smell .
Please install water supply pipe according to

below instruction :
Don't connect ice maker to hot water pipe；

Water supply pressure range is 1bar～5bar.

Using water pressure regulator for water
supply pressure over rang.
Individual water faucet must be installed for

ice maker.

7.2Purge

When installing drain hose, follow these guidelines

to be sure all purged water flowing into gully drain：
Note：Subsequent updated versions of this manual will not be noticed, thank you.
File No：JT190100004
The main gully drain capacity shall be enough for

all drain water:
The drain hose of the water-cool condenser

and the drain hose of ice bin should be placed
separately
About 2.5 centimeters drop needed for each

one meter additional drain hose and must not
be bent

8. Power supply

The power supply must be reliably grounded
and the wiring used must comply with the laws
and regulations of the country and region where
the ice maker is used.
The voltage, frequency and capacity of the power

supply shall be consistent with the nameplate of
the machine.
±10% fluctuation of rated power voltage is

allowed.
Individual circuit breakers must be installed for the

ice maker.
Version：A
Water Supply
Warning
5 / 16