B9Creations Cure XL Instructions For Use Manual page 13

5.3.1 Pause curing during the operation
5.3.2 Increase/decrease curing time when pausing curing
5.3.3 Reset IDT when pausing curing
5.3.4 Memory mode
1. Make sure the power is on
2. Press
3. Hold and press the button
memorize the IDT setting and save it as the new default.
Press
The
paused.
Note, curing will be paused once the
door is opened. The
flashing as well.
Press + to increase or press − to decrease
curing time.
After adjusting the curing time, press
to restart.
Press the buttons to reset IDT setting.
After resetting, press
to set up the terms of curing.
. After hearing 2 beeps, the system will
to pause curing.
button will start flashing when
button will start
to restart it
10